
No Skidding® - Anti Slip Coatings
Slip Resistant Floor Paint Coatings
The Anti Slip Specialty Floor Coatings are formulated to be hard wearing under industrial conditions.
No Skidding industrial grade products offer maximum performance and safety, while providing easy application and low maintenance. No Skidding Floor Coatings are designed to provide sure, safe footing on wet or sloped areas in manufacturing, operations, warehouse facilities, indoor walkways, ramps, loading docks, sports or concert venues, anywhere a tough anti slip surface is required.
No Skidding coatings include aluminium oxide (ALOX), tempered glass, polymers, crushed rock traction granules in a complete range of profiles for clear and colours. Specify fine, medium, or coarse.
EPO Tuff AU-73 Anti-Slip Aliphatic Urethane
High 73% solids with outstanding flow and blending characteristics. Its high solid content produces dry film thickness twice conventional polyurethanes and gives far more coverage.
AU-73’s special resin maintains gloss year after year and delivers durability and protection in tough industrial applications – absorbing 4 times as much direct impact as conventional polyurethanes and up to 10 times more reverse impact.
Available in a wide range of colours and ‘CRYSTAL’ CLEAR with a wide range of Traction Granules to offer excellent anti-slip characteristics.
A two part system for interior and exterior use on steel, concrete, wood glass etc AU-73 has excellent U.V. chemical and environmental resistance. Low VOC. Excellent levelling properties and dries to a superb gloss.
Coverage is approximately 21.5 square metres per US gallon at 125 microns. Available in 1 US gallon packs.
EPO Tuff ES-83 Anti-Slip Two Part Epoxy
ES-83 is a high 83% solids, high build, slip resistant epoxy protective coating for tough industrial, marine and off shore environments. This product is designed to solve complex slip injury problems with minimal surface preparation.
ES-83 bonds to tightly adhering rust and intact old paint, new and unpainted surfaces without blast cleaning with excellent resistance to weather, moisture, sunlight and chemical fumes.
Touch dry in as few as two hours at 21c with recoat in three hours, and low temperature application and cure down to 4c. Can be over-coated with a wide range of products including AU-73 to provide a superior system.
Available in a wide range of colours with a wide range of Traction Granules to offer excellent anti-slip characteristics.
A two part system for interior and exterior use on steel, concrete, wood, glass etc ES-83 has excellent U.V. chemical and environmental resistance. Low VOC. Excellent levelling properties.
Coverage is approximately 24.5 square metres per US gallon at 125 microns and can be applied at up to 200 microns. Available in 1 US gallon packs.
A two part epoxy coating formulated to provides a tough protective coating against chemical penetration including brake fluid, Skydrol, petrol, solvents etc making it ideal for automotive service bays and aviation applications.
Aqua Tuff penetrates damp, dry and green concrete sealing impossible greases and is ideal as a primmer prior to application of 100% solid epoxy coatings.
Recoat in three to four hours. Available in a range of colours with a wide range of Traction Granules to offer excellent anti-slip characteristics.
A two part system for interior and exterior use on steel, concrete AQUA TUFF has excellent U.V. chemical and environmental resistance. Excellent levelling properties.
Coverage is approximately 20.5 square metres per US gallon. Available in 1 and 5 US gallon packs.
Vulcan UV Anti-Slip Acrylate Rubber Resin
Slip Resistant Floor Coating with traction grit for interior and exterior use on wood, steel, concrete and any surface that requires safe footing. This One Part system protects concrete against de-icing damage, oil and grease and offers good resistance to acids, akalis, glycol and phosphates. VULCAN produces a seal that retards moisture in new concrete for full curing. Traction grit is available in separate measured packs in Fine, Medium or Coarse.
Coverage is approximately 33 square metres per US gallon.
EPOXY Slip Resistant Textured Aerosol Spray
A slip resistant epoxy spray that cures to a hard textured finish. Adheres to fibreglass, wood, steel and concrete.
Effective on steps, ramps, baths, ladders, stair treads, machinery, etc. Quick drying.
Available in the following colours clear, white, grey, black and yellow. 2.5 square metres /12oz can.
For further information about our No Skidding
products please contact us.
No Skidding® and the No Skidding logo are the registered trademarks of No Skidding Products Inc., Toronto, Canada. No Skidding® content is protected by copyright. No portion relating to No Skidding®, the No Skidding list of users, etc. may be reproduced or duplicated by any means without prior written consent of HANDL Solutions Limited (UK) or No Skidding Products, Inc. Toronto, Canada. |